Print Page | Close Window

1506

Printed From: BMPT Forum
Category: Boats (In alphabetical order)
Forum Name: Seaplane Tenders
Forum Description: Discussion on Seaplane Tenders
URL: http://www.bmpt.co.uk/forum_posts.asp?TID=637
Printed Date: 26 March 2026 at 1:34pm


Topic: 1506
Posted By: sharko1506
Subject: 1506
Date Posted: 05 July 2009 at 12:15pm
Hello Everyone

I am the owner of 1506 and she is nearing the end of a long restoration process. She has been virtually rebuilt with a sympathetic conversion. She is lying at Castleford West Yorkshire
beside the river Calder. Would anyone know where I could get a pair of rudder glands for her, is there anyone breaking a boat somewhere?

Regards

Andy Lovell


Replies:
Posted By: ASR1255
Date Posted: 05 July 2009 at 4:30pm
HI  ANDY .
TRY GIVING DAUNTLESS BOATYARD NEAR CANVEY ISLAND A RING , I KNOW THERE ARE A COUPLE OF ST HULLS THERE SLOWLY ROTTING AWAY, ALTHOUGH I CAN NOT REMEMBER IF THEY HAVE ANY THROUGH HULL FITTINGS .SORRY I DONT HAVE THE NUMBER FOR THEM BUT IT MIGHT BE WORTH A TRY.
BEST OF LUCK
STEVE


-------------
SAVE EM ALL

Posted By: sharko1506
Date Posted: 05 July 2009 at 4:58pm
Thank you Steve got the number from yellow pages will try them Monday

Regards

Andy

Posted By: sharko1506
Date Posted: 07 July 2009 at 11:31am
Hi Steve

I contacted Dauntless boat yard, unfortunately one has been burnt and the other one has no fittings and after court action is complete will be following the same fate as the first.

Regards

Andy

Posted By: tramontana
Date Posted: 07 July 2009 at 12:08pm
Hello Andy, glad to read you are nearly there with 1506, it has been a long time since I visited you along with her former RAF Cox and another ex RAF chap who owned 1502 at the time and we had a good chat about the complications of a "proper" renovation in regards to the Hull structure re time, money and cost of materials. How many years has it taken you to get this far. Still have the photo's from our visit and have often meant to have another trip down to see how you were doing but never got around to it. Hope you find the bits you are after and it will not be long before you are afloat and enjoying the "fruits" of your labours.

Posted By: clive
Date Posted: 07 July 2009 at 1:52pm
Hello Andy,
I still have these as posted in a previous thread..
 
http://www.bmpt.co.uk/forum_posts.asp?TID=434&KW=avon&PID=5661#5661 - http://www.bmpt.co.uk/forum_posts.asp?TID=434&KW=avon&PID=5661#5661
 
Good luck with your project, any photos?
 
 
Regards, Clive.


-------------
masbie something in the water.   www.freewebs.com/masb32/

Posted By: sharko1506
Date Posted: 07 July 2009 at 4:12pm
Hi Clive

Do you know what the shaft length is above the rudder, the shaft diameter and the diameter of the part which goes through the hull along with its depth.

Many thanks

Andy

Posted By: sharko1506
Date Posted: 07 July 2009 at 4:16pm
Hi Ron
Nice to hear from you again. I think if you come to see us you will see a big difference. Drop me a email on andrew@alovell42.plus .com and I will send you my phone number and bring you uo to date.

Rgards

Andy


Print Page | Close Window